AMP5088 12U PICMG® 2.16 Advanced Managed Platform™

HIGHLIGHTS:

• 12U, 19-in. PICMG® 2.16 Rack-Mount Enclosure
  
• 21 Hot-Swappable, 6U, Standards-Based Slots
  - 18 node slots
  - Two 10/100/1000 PICMG 2.16 redundant fabric slots
  - Two 3U redundant PICMG 2.9 IPMI-based ISM slots
  
• Dual Intelligent Shelf Managers
  
• Dual Gigabit or 10/100 Ethernet Switches
  
• Midplane Configuration:
  - Operate as 18 independent PICMG 2.16 node slots
  - Four CompactPCI® bus segments
  - All node slots support 32/64-bit, 33/66MHz SBCs and peripherals
  - 21 rear panel I/O slots (18 node slots, two fabric slots and one ISM RTM slot)
  
• Up to 1300 W Total Power and Cooling
  - Redundant hot-swappable fan trays
  - Redundant hot-swappable N+N power supply architecture
  - Isolated power inputs (no OR'ing diodes)
  
• Dual-Power Domain Midplane Isolates Catastrophic Power Failures
  
• IPMI Star Topology for Increased Reliability and Security
  
• All Field-Replaceable Units (FRUs) Serviceable from the Front (except RTMs)
  
• Designed for NEBS Level 3 and ETSI Installations
  
• Five-Nines (99.999%) Availability
  

The AMP5088 12U Platform is an extremely flexible, high availability platform that is configurable for both compute-intensive and I/O-intensive applications. One of Performance Technologies’ Advanced Managed Platform™ offerings, it provides OEM equipment designers with a carrier grade, standards-based computing platform for mission-critical applications.

The AMP5088 platform supports five-nines (99.999%) availability with built-in redundancy for active system components, including Ethernet switches, intelligent shelf managers (ISMs), power supplies, and fan trays. Redundant ISMs enable customers to manage multiple SBCs and conduct chassis diagnostics remotely for enhanced system reliability. Ethernet signals are routed across the midplane without the use of cables, which saves time in setup, maintenance, and repair, and minimizes the challenges of traditional cabling methods.

Midplane Configuration and Details

The midplane is flexible and can accommodate multiple configurations. It supports up to 18 independent servers communicating over the PICMG® 2.16-compliant Ethernet midplane (slots 3-20) or four dedicated system masters that support four independent PCI bus segments.

Component layout for the AMP5088 platform

Intelligent Shelf Manager

The AMP5088 includes redundant CPC7301 Intelligent Shelf Managers (ISMs) that operate in active/standby mode. The CPC7301 uses standards-based interfaces, which allow management of third-party IPMI-based products within a PICMG 2.16-compliant platform. The ISMs communicate with components in the AMP5088 via point-to-point IPMB busses in a unique star topology to achieve comprehensive, highly available management.

Ethernet Switching

AMP5088 platforms come configured with a choice of Performance Technologies’ award-winning switches: either dual CPC4416 24-port 10/100 + 2-Port Gb TX switches or dual CPC6600 24-port 10/100/1000 TX switches. Other switching options are also available.

Redundant Power Subsystems and Dual-Domain Architecture

The AMP5088 platform supports a redundant, scalable power solution, that accommodates up to eight 3U CompactPCI power supplies, divided into two separate power subsystems. Each delivers power to one of the two power domains on the midplane. Each power subsystem supports N+N redundant power supplies and receives input power from redundant DC or AC inputs.

The AMP5088 platform dual-power dominant/redundant power-input architecture

This is critical in central office locations where two power plants deliver redundant DC input into high availability devices. These two power subsystems maintain isolation of these inputs (no diode OR’ing) to ensure that failure of one will not affect the power input of the other. For high availability and to isolate catastrophic events, the midplane is divided into two separate power domains. Each power domain supports one fabric slot and nine node slots. The redundant ISMs and fan trays draw power from both domains for continued operation, should one domain fail.

Cooling Architecture

With 250 W power supplies, the AMP5088 platform supports more than 40 W per slot. When scaled to 300 AC or 325 DC power supplies, it powers and cools up to 50 W per node slot and 70 W per fabric slot. The platform houses three hot-swappable fan trays, which are serviceable from the front. Each tray includes three blowers and spans the distance from front to back of the chassis. The front blower cools the front card cage area, and the rear blower cools the power supplies and rear of the card cage. The middle blower cools both areas, providing N+1 redundant cooling for the entire chassis.

Cross section/side view of the AMP5088 platform

Technical Specifications

The AMP5088 is compliant with the following:

• CompactPCI core specification PICMG 2.0, R2.1
  
• CompactPCI hot-swap specification, PICMG 2.1,R2.0
  
• CompactPCI system management specification,PICMG 2.9, R1.0
  
• CompactPCI power interface specification, PICMG 2.11, R1.0
  
• CompactPCI packet switching backplane specification, PICMG 2.16, R1.0
  
• IPMI specification, version 1.5
  
• Standard CompactPCI keying

Power

Input

• AC input: 110 to 220 V AC (50 to 60 Hz)
  
• DC input: -36 to -60 V DC

Output

* CPC6303 AC power supply: the 5 V and 3.3 V rails share current

Physical

• Height: 12U, 533 mm (21-in.)
  
• Width: 436 mm (17.2-in.) without rack-mount flanges. Rack-mount flanges allow mounting to 19-in. racks.
  
• Depth: 431 mm (17-in.)
  
• Weight: 44.2 kg (97.5 lb)

Note: To provide proper cooling to the AMP5088, each unused slot in the chassis should be populated with an air management
blade. All rear slots should be populated with a rear filler panel. See the list below for orderable components:

• To cover a single rear panel slot, use a filler panel that is 6U x 4HP (horizontal pitch = 0.2-in.) (PT-ACC 5040-12059).
  
• To cover six rear panel slots, use a filler plate that is 6U x 24HP (PT-ACC 5043-12062).
  
• To fill a front slot, use an air management blade that is 6U x 4HP (PT-ACC 5031-12064).
  
• To fill a power supply bay, use an air management blade that is 3U X 8HP (PT-ACC 5030-12063).
  
• To fill an ISM slot, use a filler panel that is 3U X 4HP (PT-ACC 5044-12155).

Regulatory Compliance

• Designed for NEBS Level 3 and ETSI Installations

Safety

• UL/cUL 60950 Safety for Information Technology Equipment
  - UL File Number E179737
  
• EN/IEC 60950 Safety for Information

Technology Equipment

• CB Certificate and Report Scheme
  
• CE Certificate

Emissions Test Regulations

• FCC, Class B
  
• EN 55022/CISPR 22 Class B Radiated and Conducted Emissions Tests
  
• EN 55024/CISPER 24
  
• EN-61000-3-2 Power Line Harmonic Emissions
  
• EN-61000-3-3 Power Line Fluctuation and Flicker
  
• EN-61000-4-2 Electro-Static Discharge (ESD)
  
• EN-61000-4-3 Radiated Susceptibility
  
• EN-61000-4-4 Electrical Fast Transient Burst
  
• EN-61000-4-5 Power Line Surge
  
• EN-61000-4-6 Frequency Magnetic Fields
  
• EN-61000-4-11 Voltage Dips, Variation and Short

Interruptions Network Equipment-Building System (NEBS) Requirements

• GR-1089-CORE
  - Sect. 2 Electrical Discharge
  - Sect. 3.2.2 Radiated RF Emissions
  - Sect. 3.2.3 AC Line Conducted Emissions-Voltage
  - Sect. 3.2.4 AC & DC Line Conducted Emissions- Current
  - Sect. 3.3.1 RF Radiated Fields
  - Sect. 3.3.3 RF Common Mode
  
• GR-63-CORE issue 1
  - Sect. 5.1.1.1 Low-Temperature Exposure and Thermal Shock
  - Sect. 5.1.1.2 High-Temperature Exposure and Thermal Shock
  - Sect. 5.1.1.3 High Relative Humidity Exposure
  - Sect. 5.3.1 Handling Drop Tests-Packaged Equipment
  - Sect. 5.3.2 Unpackaged Equipment Drop Tests
  - Sect. 5.4.1 Earthquake Tests
  - Sect. 5.4.2 Office Vibration Test Procedure
  - Sect. 5.4.3 Transportation Vibration-Packaged Equipment
  - Sect. 5.6 Acoustic Noise Test

Ordering Information

• PT-AMP5088-12137
  - Two CPC6600s
  - Two 5-port rear transition modules (RTM)
  - Six 250W AC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5088-12138
  - Two CPC6600s
  - Two 5-port RTMs
  - Six DC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5088-12139
  - Two CPC4416s
  - Two 5+2-port RTMs
  - Six 250W AC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5088-12140
  - Two CPC4416s
  - Two 5+2-port RTMs
  - Six DC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5088-12225
  - Two CPC6600s
  - Two 5-port RTMs
  - Six 300W AC supplies
  - Two ISMs
  - Air management blade
  
• PT-AMP5088-12226
  - Two CPC4416s
  - Two 5+2-port RTMs
  - Six 300W AC supplies
  - Two ISMs
  - Air management blade

To discuss specific requirements and/or pricing, contact sales@pt.com.

All rights reserved. Specifications subject to change without notice. The names of actual companies, products, or services may be the trademarks, registered trademarks, or service marks of their respective owners in the United States and other countries.