AMP5086 12U PICMG® 2.16 Advanced Managed Platform™

HIGHLIGHTS:

• 12U, PICMG® 2.16 19-in. Rack-Mount Enclosure
  
• 21 Hot-Swappable, Standards-Based Slots
  - 18 node slots
  - No PCI Bus
  - Two 10/100/1000 PICMG 2.16 redundant fabric slots
  - Two 3U redundant PICMG 2.9 IPMI-based ISM slots
  
• Intelligent Shelf Managers
  
• Dual Gigabit or 10/100 Ethernet Switches
  
• Up to 1300 W Total Power and Cooling
  
• Isolated Power Feeds
  
• IPMI Star Topology for Increased Reliability and Security
  
• All Field-Replaceable Units (FRUs) Serviceable from the Front (except RTMs)
  
• Designed for NEBS Level 3 and ETSI Installations
  
• Five-Nines (99.999%) Availability
  

The AMP5086 12U PICMG® 2.16 Platform is an extremely flexible, high-availability platform, configurable for both compute-intensive and I/O-intensive applications. One of Performance Technologies’ Advanced Managed Platform™ offerings, it provides OEM equipment designers with a carrier-grade, standards-based computing platform for mission-critical applications.

The AMP5086 platform supports five-nines (99.999%) availability with built-in redundancy for active system components, including Ethernet switches, intelligent shelf managers (ISMs), power supplies, and fan trays. Redundant ISMs enable customers to manage multiple single board computers and conduct chassis diagnostics remotely for enhanced system reliability. Ethernet signals are routed across the midplane without the use of cables, which saves time in setup, maintenance, and repair, and minimizes the challenges of traditional cabling methods. The AMP5086 has been optimized for use with blades that do not require a PCI Bus to operate or communicate. It is also ideal for use with boards that may have conflicts with a PCI Bus.

Midplane Configuration and Details

The midplane supports up to 18 independent blades that communicate over the PICMG 2.16- compliant Ethernet midplane (slots 3-20) and a single H.110 telephony bus that span all 18 node slots. There are three V(I/O) planes that can be set separately for either 3.3 V or 5 V operation: two for each fabric plane and one for the 18 node slots plane.

Component layout for the AMP5086 platform

Intelligent Shelf Manager

The AMP5086 platform includes two redundant CPC7301 ISMs operating in active/standby mode. The CPC7301 PICMG 2.9 specification for a standards-based interface allows management of third-party, IPMI-based products within a PICMG 2.16-compliant platform. ISM software interfaces are comprehensive, including a Web-based GUI, a command line interface (CLI), SNMP, and more. It communicates with components in the AMP5086 via point-to-point IPMB buses in a unique star topology to achieve secure, highly available management.

Ethernet Switching

AMP5086 platforms come configured with a choice of Performance Technologies’ award winning switches: either dual CPC4416 24-port 10/100 + 2-Port Gb TX switches or dual CPC6600 24-port 10/100/1000 TX switches. Other switching choices are available.

Redundant Power Subsystems Architecture

The AMP5086 platform supports a redundant, scalable power solution, which accommodates up to eight 3U CompactPCI power supplies divided into two separate power subsystems. This power architecture provides N+N redundant power supplies and receives input power from redundant DC or AC inputs. This is critical in central office locations where two power plants deliver redundant DC input into high-availability devices. These two power subsystems maintain isolation of these inputs (no diode OR’ing) to ensure that failure of one will not affect the power input of the other.

The AMP5086 platform redundant power-input architecture

Cooling Architecture

The AMP5086 can power and cool up to 1300 W with full redundancy. The platform houses three hot-swappable fan trays, which are serviceable from the front. Each tray includes three blowers and spans the distance from front to back of the chassis. The front blower cools the front card cage area and the rear blower cools the power supplies and rear of the card cage. The middle blower cools both areas, providing N+1 redundant cooling for the entire chassis (see figure below).

Airflow cross section/side view of the AMP5086 platform.

Technical Specifications

The AMP5086 is compliant with the following:

• CompactPCI core specification PICMG 2.0, R3.0
  
• CompactPCI hot-swap specification, PICMG 2.1, R2.0
  
• CompactPCI system management specification, PICMG 2.9, R1.0
  
• CompactPCI power interface specification, PICMG 2.11, R1.0
  
• CompactPCI packet switching backplane specification, PICMG 2.16, R1.0
  
• IPMI specification, version 1.5
  
• Standard CompactPCI keying

Power

Input

• AC input: 100 to 240 V AC (50 to 60 Hz)
  
• DC input: -36 to -60 V DC

Output

* CPC6303 AC power supply; the 5 V and 3.3 V rails share current.

Physical

• Height: 12U, 533 mm (21-in.)
  
• Width: 436 mm (17.2-in.) without rack-mount flanges. Rack-mount flanges allow mounting to 19-in. racks
  
• Depth: 431 mm (17-in.)
  
• Weight: 44.2 kg (97.5 lb)

Note: To provide proper cooling to the AMP5086, each unusedslot in the chassis should be populated with an air management blade. All rear slots should be populated with a rear filler panel. See the list below for orderable components:

• To cover a single rear panel slot, use a filler panel that is 6U x 4HP (horizontal pitch = 0.2-in.) (PT-ACC 5040-12059).
  
• To cover six rear panel slots, use a filler plate that is 6U x 24HP (PT-ACC 5043-12062).
  
• To fill a front slot, use an air management blade that is 6U x 4HP (PT-ACC 5031-12064).
  
• To fill a power supply bay, use an air management blade that is 3U X 8HP (PT-ACC 5030-12063).
  
• To fill an ISM slot, use a filler panel that is 3U X 4HP (PT-ACC 5044-12155).

Regulatory Compliance

• Designed for NEBS Level 3 and ETSI installations

Safety

• UL/cUL 60950 Safety for Information Technology Equipment E179737
  - UL File Number E179737
  
• EN/IEC 60950 Safety for Information Technology Equipment
  
• CB Certificate and Report Scheme
  
• CE Certificate

Emissions Test Regulations

• FCC, Class B
  
• EN 55022/CISPR 22 Class B Radiated and Conducted Emissions Tests
  
• EN 55024/CISPER 24
  
• EN-61000-3-2 Power Line Harmonic Emissions
  
• EN-61000-3-3 Power Line Fluctuation and Flicker
  
• EN-61000-4-2 Electro-Static Discharge (ESD)
  
• EN-61000-4-3 Radiated Susceptibility
  
• EN-61000-4-4 Electrical Fast Transient Burst
  
• EN-61000-4-5 Power Line Surge
  
• EN-61000-4-6 Frequency Magnetic Fields
  
• EN-61000-4-11 Voltage Dips, Variation and &

Short Interruptions Network Equipment-Building System (NEBS) Requirements

• GR-1089-CORE
  - Sect. 2 Electrical Discharge
  - Sect. 3.2.2 Radiated RF Emissions
  - Sect. 3.2.3 AC Line Conducted Emissions-Voltage
  - Sect. 3.2.4 AC & DC Line Conducted Emissions-Current
  - Sect. 3.3.1 RF Radiated Fields
  - Sect. 3.3.3 RF Common Mode
  
• GR-63-CORE issue 1
  - Sect. 5.1.1.1 Low-Temperature Exposure and Thermal Shock
  - Sect. 5.1.1.2 High-Temperature Exposure and Thermal Shock
  - Sect. 5.1.1.3 High Relative Humidity Exposure
  - Sect. 5.3.1 Handling Drop Tests-Packaged Equipment
  - Sect. 5.3.2 Unpackaged Equipment Drop Tests
  - Sect. 5.4.1 Earthquake Tests
  - Sect. 5.4.2 Office Vibration Test Procedure
  - Sect. 5.4.3 Transportation Vibration-Packaged Equipment
  - Sect. 5.6 Acoustic Noise Test

Ordering Information

• PT-AMP5086-12133
  - Two CPC6600s
  - Two 5-port rear transition modules (RTM)
  - Six 250 W AC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5086-12134
  - Two CPC6600s
  - Two 5-port RTMs
  - Six 325 W DC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5086-12135
  - Two CPC4416s
  - Two 5+2-port RTMs
  - Six 250 W AC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5086-12136
  - Two CPC4416s
  - Two 5+2-port RTMs
  - Six 325 W DC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5086-12225
  - Two CPC6600s
  - Two 5-port rear transition modules (RTM)
  - Six 300 W AC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade
  
• PT-AMP5086-12226
  - Two CPC4416s
  - Two 5+2-port RTMs
  - Six 300 W AC supplies
  - Two ISMs
  - ISM RTM
  - Air management blade

To discuss specific requirements and/or pricing, contact sales@pt.com.

All rights reserved. Specifications subject to change without notice. The names of actual companies, products, or services may be the trademarks, registered trademarks, or service marks of their respective owners in the United States and other countries.